Quantitative Aptitude: Read the Chart Before the Numbers

Cover image for the article: Quantitative Aptitude: Read the Chart Before the Numbers

Before you calculate, find out what the chart is actually telling you. Half the wrong answers in data questions come from skipping that step.

The routine

Data interpretation questions look different from arithmetic ones, but the same four steps work almost everywhere.

  1. Read the title and the units. Is it thousands, per cent, or a count? A units mistake costs more than any calculation slip.
  2. Read the axes or headings. Where does the scale start? What is each category?
  3. Read the question, then go back to the data. You usually need only two or three numbers. Find them and ignore the rest.
  4. Estimate, then calculate. Decide roughly how big the answer should be before you do exact work.

A worked example

A small shop recorded the units it sold each quarter. This is an invented example, not real data.

QuarterUnits sold
Q1120
Q2150
Q3135
Q4195

The total is 120 + 150 + 135 + 195 = 600.

  • Change from Q1 to Q2: 150 – 120 = 30, and 30 / 120 = 25%, a rise.
  • Change from Q2 to Q3: 135 – 150 = -15, and 15 / 150 = 10%, a fall.
  • Share of the year in Q4: 195 / 600 = 32.5%.
  • Q4 compared with Q3: 60 / 135 = about 44.4% more.

Notice that each change uses a different base. Percentage change always divides by the starting value, not the ending one. A question about “the fall from Q2 to Q3” starts from Q2.

The axis trap

Now suppose this table is drawn as a bar chart whose vertical axis starts at 100, not 0. The Q1 bar then stands 20 units tall (120 – 100), and the Q4 bar stands 95 units tall (195 – 100). Visually, Q4 looks about 4.75 times as big as Q1.

In the data, 195 / 120 = 1.625. Q4 is a little over one and a half times Q1. A chart that starts above zero exaggerates differences. If a question says “about how many times”, use the printed values, never the bar heights.

Shares, points and changes

The same table hides another pair that gets confused. In Q1 the shop sold 120 of its 600 units, a 20% share. In Q4 the share was 32.5%. That is a rise of 12.5 percentage points, and a rise of 62.5% in relative terms (12.5 / 20). The two numbers answer different questions. If you need a refresher on that difference, the percentages guide covers it.

Common slips

  • Using the wrong base for a percentage change.
  • Reading the top of a stacked bar as the value of the top segment.
  • Mixing up a total with an average.
  • Missing a footnote that changes the unit.
  • Doing exact arithmetic when the options are far enough apart to estimate.

The Quantitative Aptitude course has a data interpretation unit, and in its guided sets each wrong option names the slip behind it.

Quick FAQ

Do the GMAT and GRE both ask about data?

Both have questions built on data, but layouts and names change over time. Read the current official description instead of trusting a summary, including ours.

Should I calculate everything exactly?

No. Estimate first, and calculate exactly only when the options are close together.

What if the chart looks different from the question?

Trust the labelled values, not the picture. Check the axis start and the units before anything else.

Official sources

GMAT is a trademark of GMAC. GRE is a trademark of ETS. Prepspire is independent and not affiliated.

Keep going: the Quantitative Aptitude course, free taster courses and free sample tests.